1 / 4
Minimalist Wall Mounted Coat Hook (hermeta 0139) — zdjęcie 1
1 / 4

Minimalist Wall Mounted Coat Hook (hermeta 0139)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact, modern and minimalist wall-mounted coat hook, inspired by the classic Hermeta 0139 aluminum coat hook.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A compact, modern and minimalist wall-mounted coat hook, inspired by the classic Hermeta 0139 aluminum coat hook.

This 3D printable replacement features a clean, angular design with smooth edges, a rounded upper front corner and a reinforced hook tip.

Perfect for hanging jackets, coats, towels, bags and other lightweight everyday items.

Features

  • Minimalist and modern design

  • Rounded edges for a smooth finish

  • Reinforced front hook for additional strength

  • Two countersunk mounting holes

  • Compact design, ideal for narrow spaces

  • Easy to print without supports

  • Parametric OpenSCAD source file available

Dimensions

  • Height: 47 mm

  • Width: 17 mm

  • Depth: 41 mm

  • Mounting hole spacing: 19 mm (center to center)

  • Mounting hole diameter: 4 mm

  • Rounded upper front corner: R3 mm

Recommended Print Settings

  • Material: PETG, ASA or ABS

  • Layer height: 0.2 mm

  • Perimeters: 5–6

  • Infill: 60–100%

  • Supports: Not required when printed on its side

  • Orientation: Print flat on its side for better layer strength

PETG is recommended for indoor use due to its durability and flexibility compared to standard PLA.

Installation

Mount the hook using two suitable countersunk screws and wall plugs if required.

Notes

This is a custom-designed, 3D printable alternative inspired by an existing aluminum coat hook. It is not an official Hermeta product.

Strength depends on the material, print orientation, slicer settings and mounting surface. Avoid excessive loads and test before regular use.

Enjoy printing! If you like this design, feel free to share your makes and feedback.

Tagi