1 / 5
Animal Sand Moulds - Set of 7 for Kinetic Sand — zdjęcie 1
1 / 5

Animal Sand Moulds - Set of 7 for Kinetic Sand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Seven animal sand moulds (bunny, bear, pig, duck, tortoise, crocodile, elephant) for kinetic sand, beach and play dough.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Standard Digital File License

Seven animal moulds for kinetic sand, beach sand and play dough: bunny, teddy bear, pig, duckling, tortoise, crocodile and elephant. Press the sand in firmly, flip the mould over and lift it off: the face and shell details come out on top of each sand figure.

What's in the set

7 moulds, all on one plate: bunny head, bear face, pig face, duckling, tortoise, crocodile and elephant

Each mould is about 59 mm wide and 20 mm tall, a good size for small hands

Small holes in the base let air in, so the shape releases cleanly

Print settings

Printed on: Bambu Lab X1 Carbon, 0.4 mm nozzle, textured PEI plate

Settings: 0.20 mm layers, 2 walls, 15% infill, no supports needed

Filament: PLA. Print open side up, exactly as placed on the plate.

The plate is about 188 mm wide; on a smaller bed, print the moulds in two batches.

The 3MF is a Bambu Studio project; it also opens in PrusaSlicer and other slicers.

Tips

Slightly damp sand or kinetic sand holds the details best.

Rinse the moulds with water after play and let them dry.

PLA softens in strong heat, so don't leave the moulds in a hot car or in full summer sun for hours. PETG is a good choice for beach use.

Always supervise young children during play.

Made with CuttersTech

Designed and test-printed by us in Latvia, in our browser studio at cutterstech.com. There you'll find many more sand mould types: sea creatures, shapes, numbers and letters, in any size, with a child's name pressed into the top.

Tagi