Yet Another Photo Sweep (Basic Light Box) Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a light box for taking pictures of 3D prints, but they take up so much room. The Photo Sweep is a quick and…
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 377
- Wydruki
- 18
- Wyświetlenia
- 2112
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I wanted a light box for taking pictures of 3D prints, but they take up so much room. The Photo Sweep is a quick and easy way to provide a background. Simply use a piece of paper and clip the two stand in place.
v2 - Updated version here…
https://www.printables.com/model/718150-yet-another-photo-sweep-basic-light-box-stand-v2
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10%
Notes:
The clips have a flat side and an indented side. Make sure the flat side sit flush with the vertical piece, otherwise the snap may break when inserted.
There is a test piece to print before hand to make sure your printer tolerance is set correctly, so the pieces fit together well.
How I Designed This
I saw HPaul's Photographic Sweep Stand and I liked that idea. A remix by Claghorn Tweaked Photo Sweep Stand looked simpler to print and I liked the idea of using filament for the pins. However, after I printed it the holes were too small.
I started thinking why not use a snap and socket? I uploaded Claghorn's file to Tinkercad and replaced the pins, with a snap and socket. The two piece snap together and hold the paper.
https://www.thingiverse.com/thing:106568 https://www.thingiverse.com/thing:548006
Category: Art Tools