Battlestar Galatica MKII Viper with Landing Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The best things about 3D printing is getting to print things you loved as a kid, the Battlestar Viper is one of mine.…
- Ocena
- 4,875 / 5
- Polubienia
- 88
- Pobrania
- 544
- Wydruki
- 9
- Wyświetlenia
- 2750
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The best things about 3D printing is getting to print things you loved as a kid, the Battlestar Viper is one of mine.
I searched and found many versions. I wanted one with landing gear so it would sit better as a display. So, I started with Mylotian's version, however when I scaled it down it print too thin and I really wanted one that was all one piece. Next, I tried alpokemon's version with a stand. I looks good, but no landing gear.
I decide to combine these two great models. I thickened the land gear to fix the Viper. To me, the Viper was tilled just a bit, so I leveled it out and hollowed out the rockets a bit more.
Enjoy!
-D3
https://www.thingiverse.com/thing:3154311 https://www.thingiverse.com/thing:2734674
Print Settings
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
10%
Filament:
Stronghero3D 3D PLA
Epic Rainbow Multicolors
Notes:
Touching Build for supports.
For Cura, supports try...Support Overhang 60
Support Pattern Grid
Support Density 15%
Support Top Distance 0.3mm
Support X/Y Distance 0.6mm (PLA) 0.7mm (PETG)
Support Distance Prority Z Overides X/Y
Minimum Support 0.2mm
Support Join Distance 2.0mm
Gradual Support Infill Step 3
Category: Vehicles