Hamgadgets UPK Ultra Pico Keyer Replacement Faceplate / Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned with color to replace ill-fitting one. Liked the new look a lot, so I re-did all 3 of my keyers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like these little memory keyers. They are super handy. They can save 8 memories (4 accessible in each of 2 banks) and have full controls. If you're into CW, go check them out.
I have 3 of them. The latest one had an issue with the cover causing button to stick so I decided to re-engineer it and add some color/flair.
I made the inlays with tiny objects in the corners to help align with the plates when everything is turned face down. The alignment cubes don't print because too small, but even if they do, they are in the area of the supports, so will not affect quality. The fit is same as original in the enclosure.
Printed PETG, 100% infill, minimal supports on the edge/lip.
If you're interested in a kit, you can get one here: https://hamgadgets.com/UPK-Ultra-Pico-Keyer-kit_p_32.html They also sell them assembled.
Enjoy
73 de K4ZX