Sapphire Infusion Pump Mount Adapter for Rugged Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts 3d-printed rugged case to the OEM mount; adds a hangar and twist-n-lock. For the Sapphire Infusion Pumps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a case for the Sapphire infusion pump for our helicopter EMS company. It is a standalone accessory, and doesn't have a provision for mounting to an IV pole. <Note: I have a couple of changes to make before I'm happy publishing it.>
This adapter allows the pump case to snap into the OEM mount. Sandwiched between the adapter and the rugged case is a TPU hangar. On the back side of the adapter is a twist-n-lock accessory receiver. I've included the accessory we use, a loop for an elastic strap to fill the space with bags of sterile tubing (when not attached to the OEM mount).
Printing Notes:
Use TPU for the hangar - high infill and 5 walls will make it nearly indestructible.
Supports are needed for the adapter. Use at least 4 walls of PETG.