Victoreen 492 Radiation Battery Mount/Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Victoreen 492 Radiation Battery Mount/Holder to replace broken OEM part (don't know OEM part #)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I had an old Victoreen 492 Radiation tester that had a broken pieces, wouldn't stay mounted because the mount holes broke off when I went to replace the batteries. I hand measured the dimensions with calipers and got a nice fit fit for the batteries. I don't know if it will work with any other model.
Holds (2) 1.5Volt NEDA Type Batteries. WILL NOT WORK WITH AAA OR AA BATTERIES
Print settings: See photos below. I used PLA but I would recommend using PETG. Print speed can be increased, I was not in a rush for the print.



