Low-profile & adjustable dash mount for Enhance S3XY Dash – Tesla

TITLE:

Low-profile & adjustable dash mount for Enhance S3XY Dash – Tesla Model 3 Highland

SUMMARY:

Low-profile MagSafe-style mount that lets the S3XY Dash sit directly on the dashboard, with an adjustable-angle version.

DESCRIPTION:

Alternative mounts for the Enhance S3XY Dash display on the Tesla Model 3 Highland dashboard (windshield / HUD position).

With the original stand the display sits fairly high and hides part of the road. These mounts let the display sit low, resting on the dashboard.

Versions:

- Adjustable mount (BASE + HEAD): hinge with an M4 bolt. Loosen, tilt the display to match the angle of the Tesla center screen, tighten. Range about -5° to +35°.

- Fixed mounts (wedge4 / wedge8 / wedge12): one-piece, 12° tilt. The round head is wedge-shaped to match the sloped back of the display. Start with wedge8; if the head touches only at the top try wedge12, if only at the bottom try wedge4.

- Cable clips: one type wedges into a dashboard gap, one sticks on with tape. For cables up to about 4 mm.

Features:

- Round Ø57 mm head fits the recess on the back of the display (like the original stand)

- Holds the display with a MagSafe-style magnetic ring (not included)

- Cable opening in the middle so the USB-C cable stays hidden

- Small footprint, mounts with 3M VHB tape (the spare pad from the Enhance box works)

Hardware:

- 1x MagSafe MAGNETIC ring, stick-on (it must contain magnets – a "metal ring/plate" will NOT work)

- Adjustable version: 1x M4 x 30 mm bolt, 1x M4 nut (hex pocket in the ear), 2 washers recommended

- 3M VHB tape

Print settings:

- Material: ASA strongly recommended for the final part (sun and heat on the dashboard). PETG minimum. PLA only for test fitting – it softens around 55–60°C.

- Layer height 0.2 mm (0.12 mm for nicer text), 4 walls, 30–40% infill, no supports

- Base / fixed mount: print standing on the foot. Head: print with the magnet face on the bed.

- ASA: enclosed printer, 5 mm brim

Notes:

- Designed for my car and my display; dashboards and tolerances may differ. Test in PLA first.

- Work in progress – feedback and photos of your prints are welcome!

- Use a windshield sunshade in summer.

TAGS:

tesla, model3, highland, s3xy, enhance, s3xydash, dashmount, magsafe, car, mount

LICENSE (suggestion):

Creative Commons – Attribution – NonCommercial