Otinga Flip V2/V3 3rd Fixing Point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Hook can replace your V3 one or be added to a V2 Otinga Flip.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This third fixing point for your Otinga Flip V2/V3 Backpack is great to securely mount the bag on your bike.
Recreated from measurements of a physical Otinga Flip V3 hook. Modelled from scratch in CAD and exported as 3MF files.
I drew this to retrofit the mounting system on my V2.
You need to use two spacers and longer M5 screws for the rail on the bag (M5x20mm) and you need two pairs of M5x25 Screws plus nuts for the hook.
Because the rail on the V2 sits so low, I needed to mount it in a way where the bike first gets set on the hook and then connected at the top. Also, the angle is set at 60° as I did not feel like designing a ratcheting mechanism, like the original.
Feel free to ask me for different angles.
Enjoy :)