3D Benchy Valve Cap – For Schrader & Dunlop Valves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Valve Cap
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Standard Digital File License
English description below! / 🇩🇪 Deutsche Beschreibung unten!
Bring the iconic 3D Benchy to your bike wheels! 🚢✨
This custom-fitted Benchy valve cap is the ultimate fun accessory for your ride. The set includes two specific versions to ensure a snug fit:
Schrader Valve (Car / AV): Fits standard car valves, most MTBs, and E-bikes.
Dunlop / Woods Valve (DV): Fits traditional bicycle valves.
💡 Print Settings & Profile Info:
Manual Supports Included: The provided print profile comes with custom manual supports pre-configured inside the valve cavity. This guarantees a clean print and makes the supports super easy to remove!
Layer Height: 0.12 mm – 0.16 mm (recommended for fine details on the small hull and cabin).
Infill: 15% – 20% (Grid or Gyroid).
Material: PETG or ASA/ABS is recommended for outdoor durability (UV & weather resistant). PLA works great for casual riding as well.
⚠ Safety Notice / Disclaimer: This valve cap is designed primarily for bicycles. Using it on cars or motorcycles is strictly intended for show and exhibition purposes only. Due to high centrifugal forces at high speeds, using this cap on motor vehicles in normal traffic is not recommended!
Bring das legendäre 3D Benchy auf dein Fahrrad! 🚢✨
Diese individuell angepasste Benchy-Ventilkappe ist ein echter Hingucker. Im Modell-Set sind zwei verschiedene Versionen enthalten, damit sie perfekt auf deine Ventile passen:
Autoventil / Schrader (AV): Passend für Autoventile, Mountainbikes und E-Bikes mit Schrader-Ventil.
Blitzventil / Dunlop (DV): Passend für klassische Fahrradventile (Dunlop / Woods).
💡 Druckempfehlungen & Profil-Info:
Manuelle Stützen (Supports): Im hinterlegten Druckprofil sind bereits manuelle Stützen im Inneren der Ventilaussparung hinzugefügt. Diese sorgen für einen perfekten Druck und lassen sich nach dem Drucken extrem leicht und rückstandslos entfernen!
Schichthöhe: 0.12 mm – 0.16 mm (für maximale Detailtreue der kleinen Geometrien).
Infill: 15% – 20% (Grid oder Gyroid).
Material: PETG oder ASA/ABS wird für den Außenbereich empfohlen (UV- und wetterbeständig). PLA funktioniert für schönere Tage ebenfalls super.
⚠ Sicherheitshinweis: Die Kappe ist primär für Fahrräder gedacht. Die Nutzung an Autos oder Motorrädern dient nur zu Show- und Ausstellungszwecken (Show & Shine). Aufgrund der hohen Fliehkräfte bei schnellen Fahrten wird die Nutzung im Straßenverkehr an Kraftfahrzeugen nicht empfohlen!