Pan Component for Velbon PH-346 Tripod Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fairly faithful reproduction that replaces and improves on the pan component in the head of the Velbon PH-346 tripod.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- CERN Open Hardware Licence Version 2 - Strongly Reciprocal
This improves on the original part by allowing the tightening screw to run in a metal nut instead of straight into the plastic, increasing strength and avoiding one of the sources of the cracking that happens to the original piece.
Recommended Settings:
Black PETG or your preferred non-abrasive structural polymer
Structural
0.4mm nozzle
0.10mm layer height
Avoid crossing perimeters [144] (without this your machine will crash.
Extra Tips:
IMPORTANT - Pause the print at the shape change in the nut hole so that you can insert it and continue.
Lubricate with some form of plastic compatible damping grease (eg. Nyogel) to get a very smooth/steady motion (almost like a fluid head). Otherwise silicone dielectric grease works alright.