Modular Mini Conveyor Belt for Arduino Automation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully printed modular conveyor belt on a TT gear motor for Arduino automation experiments: start/stop on an IR sensor, count parts, add an SG90 pusher or a sorter later; refurbished remix of the CC BY-SA Modular Conveyor Belt by wolfelm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
# Modular Mini Conveyor Belt for Arduino Automation
A small, fully 3D-printed conveyor belt for automation experiments on the desk. A TT gear motor drives the belt through an L9110S motor driver, an Arduino Nano runs it, and an IR obstacle sensor at the end of the belt starts, stops and counts parts. The frame is modular: print more frame sections to make the belt longer, bolt an SG90 pusher or a colour-sorting station beside it, and you have the beginnings of a tabletop production line for learning PLC-style sequencing, DC speed control, sensor debouncing and belt tensioning.
What you get in the download:
- the 25 print files for the frame, rollers, belt links, guides and sensor mounts (PLA for the frame, TPU for the belt),
- a Build Guide PDF: software install and example sketch first, then printing, assembly, wiring, belt tensioning and first run,
- a Bill of Material PDF with every purchased part and a shop link per row.
Typical cost is 20 to 35 USD in parts plus filament, and most of the build time is printing.
This is a remix of the Modular Conveyor Belt for Educational Automation Projects by wolfelm on Printables, updated and refurbished for modern use with a single Arduino build path, a current-parts Bill of Material and a rewritten English build guide.