Raised Buttons for Ploopy A+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raised caps for the top row of the Ploopy A+, remixed from @Karl_run's Adept version.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Raised caps for the top row of the Ploopy A+, remixed from @Karl_run's Adept version.
The Adept caps are close on the A+ but the button outlines are different, so these are rebuilt rather than edited from the original mesh. The outlines come straight from Ploopy's A+ CAD, and the tops are smooth surfaces fitted to the original design, so there are no facets or creases carried over from the original STL. I also added a fourth cap for the last button in the row and lowered the whole set to 8mm so it's harder to bump by accident.
Print flat side down, no supports. The 3MF imports as one object, split it if you only want some of the caps. There's also a thin footprint test file if you want to check the fit first, and a STEP file if you want to modify them in CAD.
A glue stick works amazingly well for sticking them to the base of your A+ housing.