Back panel adapter for Core One INDX filament sensor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the filament sensor on the back of your Core One using this adapter and the stock sensor mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1.1
Mount the filament sensor on the back of your Core One by inserting this adapter between the stock sensor mount and the back panel and using available holes on the rear profile.
Simpler than reprinting a new mount but does require replacing the 12mm screws that pass through the adapter with 16mm screws. If you don't have 16mm screws, use the original model https://www.printables.com/model/1838910-core-one-indx-rear-filament-entry-sensor-mount instead.
The stock sensor mount is printed with PETG so that is recommended for this part with extra perimeters. No supports needed.