Coral-Themed CoralBoard SL Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🪸 Coral-themed Coralboard SL case: snap-fit lid, port cutouts and M3 mounting. 🛠 Not print-tested.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Give your Coralboard SL a coral-inspired home. This enclosure combines a rounded, ribbed outline with port and connector cutouts, circular ventilation openings and a lid designed to snap into place.
Design status: not print-tested. The images are illustrative renders with a simulated FDM finish. Physical fit, snap action, connector clearance and cooling performance have not yet been verified.
Features
Coral-inspired exterior with a scalloped outline and rounded vertical ribs.
Snap-fit lid design with access openings for the board's connectors.
Board mounting with M3 hardware: heat-set inserts in the base and four M3 screws secure the board to the case.
Circular ventilation openings in the lid.
Hardware required
M3 heat-set inserts for the mounting points in the base.
4 × M3 screws.
The board and mounting hardware are not printable parts. Insert dimensions and screw length are not specified; check these against the mounting geometry and board clearance before assembly.
Intended assembly
Install the M3 heat-set inserts in the base's mounting points.
Position the Coralboard SL, aligning its ports and connectors with the cutouts.
Secure the board with four M3 screws of suitable length.
Align the lid and engage its snap tabs.
This design targets the Coralboard SL. Compatibility with other Coralboard versions is unverified. No tested print settings or support requirements are claimed.