CORAL CASE-01 (Synaptics Coralboard SL Case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Teenage Engineering-inspired minimalist enclosure for the Coral Board, combining bold industrial design with functiona
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 1455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
CORAL CASE-01
CORAL CASE-01 is a Teenage Engineering-inspired enclosure for the Coral Board, designed with a focus on minimalist industrial design and 3D-printing practicality.
3D Printing
• All parts are designed to print without supports.
• The geometry is optimized specifically for FDM 3D printing.
Hardware Required
• 4 × M3 × 10 mm screws
Assembly Instructions
1. Install the Button Caps
Snap the two button cap halves together, trapping the housing between them.
2. Check the Button Assembly
The images show the assembled button from both the outside and inside of the enclosure.
3. Repeat for the Second Button
Repeat the same process for the second button.
4. Install the Board and Secure the Cover
Place the Coral Board inside the enclosure and secure the cover using the M3 × 10 mm screws.