1 / 6
CoralBoard SL Snap-Fit Case – Vented, All Ports Open, Wall/VESA Keyholes — zdjęcie 1
1 / 6

CoralBoard SL Snap-Fit Case – Vented, All Ports Open, Wall/VESA Keyholes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two-part snap-fit case for the Synaptics CoralBoard SL: every port open, header windows, vents, keyhole wall mounting.

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Apache License 2.0

A compact two-part case for the Synaptics CoralBoard SL, designed in Autodesk Fusion directly around Coral's official reference CAD (printables.com/model/1859306), so every connector lines up with the real board.

FEATURES

  • Snap-fit lid: a lip with small snap bumps clicks into grooves in the base. No screws needed for the lid.

  • - Every edge connector stays usable: USB-C (power/data), USB-A, both push buttons, the front JST connector, the microSD slot (left side), and the right-side connectors.

  • - Header access windows in the lid for the 2x10 pin header, both long female headers and the 2x2 header, so you can plug in jumper wires with the case closed.

  • - Vent slots over the SoC in the lid, plus vents in the floor and side wall.

  • - Four keyhole slots in the floor: hang the case straight on screws in a wall, or slide it onto the matching CoralBoard SL VESA / Wall Mount plate (separate model). When it hangs, the ports face down so cables drop neatly.

  • - Recesses for four 10 mm rubber feet.

  • - Checked in CAD against the reference model: zero interference with any component. The board sits on 5 mm standoffs, leaving 2.8 mm under its lowest bottom-side part.

OUTSIDE SIZE: 78.6 x 65.4 x 20.6 mm

HARDWARE

  • 4x M3 x 6-8 mm self-tapping (or machine) screws to fix the board to the standoffs (2.6 mm pilot holes)

  • - Optional: 4x 10 mm round rubber feet

  • - Optional: 2-4 wall screws (4 mm / #8, pan head) for hanging on a wall

PRINTING

  • PLA or PETG, 0.2 mm layers, 3 walls, 15-20% infill, no supports.

  • - Base: print as supplied (floor on the bed).

  • - Lid: the files are already flipped so the top lies on the bed; the text and vents print cleanly.

  • - The 3MF files are ready to open in PrusaSlicer, Bambu Studio or OrcaSlicer.

ASSEMBLY

  1. Put the board into the base, ports first into the front openings, then lower the back onto the standoffs.

  2. 2. Screw it down with 4x M3 screws.

  3. 3. Line up the lid and press it down until the snaps click.

FILES

  • STL and 3MF for printing, STEP for editing in any CAD tool, plus the full Fusion design (.f3d) including the reference board and the mount.

Board reference CAD: Synaptics Coralboard SL by Coral (Apache-2.0). Designed with AI assistance (Claude) and modelled in Autodesk Fusion.

Tagi