Adjustable Kossel delta spool holder extension arms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Place the spool holder for your delta printer at the top of the machine. These arms work with Emmet's spool holder gear
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I added 2 new stl files to this - labeled as v2. They allow the bracket to be used closer to the frame of the Kossel and there is a much longer arm that allows the spool holder to rest on the back of the Kossel and only utilize one extension bracket (the longer one)..
These are extension arms built for a 2020 extrusion Kossel to be used with this thing http://www.thingiverse.com/thing:454808 (Emmet's gear bearing spool holder).
This is made for a larger Kossel with 280mm long horizontal extrusions or larger. Mine are 300mm wide and it works like a charm. These extension arms will extend approx 50mm in length.