1 / 7
The Reliquary — Collector’s Book for The Printed Secret Escape Room Games — zdjęcie 1
1 / 7

The Reliquary — Collector’s Book for The Printed Secret Escape Room Games

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print-in-place collector’s book for the sigils you earn by finishing The Printed Secret escape-room games.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Standard Digital File License
Part of a game: these prints are pieces of a 3D-printed escape room. The story and puzzles play in your browser.
Purchase required
The Reliquary

MULTICOLOUR IS THE DEFAULT — PRINT TIME DEPENDS ON YOUR PRINTER

The roughly 60-hour MakerWorld estimate is for the Bambu A1/AMS profile: a single nozzle repeatedly changes and flushes colours. It is not a universal printing time for these books.

For comparison, my own multicolour print takes around 17 hours on my four-toolhead Flashforge C5. That is my reported result for my own print and setup; the book, parts selected, material and settings can change the time. Single colour remains an option.

SINGLE COLOUR — QUICK START

Download The-Printed-Secret-Reliquary-R12-Upright-Print-in-Place.stl for the simple one-colour route. Print the ONE book upright at 100% scale; the coloured 3MF is optional. The STL has no colour assignments or printer settings: select your own printer and inspect the slice.

A1 TIME COMPARISON — complete book: about 9 hours 50 minutes single colour versus 58 hours 38 minutes multicolour (about 49 hours longer). Reference Bambu Studio 2.8.2.61, A1/0.4 mm/0.20 mm/3 walls/10% Gyroid. Estimates only; other machines/materials differ.

If using a painted 3MF instead: erase all colour painting, assign every part to one filament, disable the prime tower and re-slice. Check one filament/no colour changes in Preview; merely changing swatch colours does not remove swaps.

🏆 A COLLECTOR’S BOOK FOR THE PRINTED SECRET ESCAPE-ROOM GAMES

Each Printed Secret game is a 3D-printed escape-room mystery played between your table and your browser. Finish a game and you earn its sigil — a small printable keepsake. The Reliquary is the print-in-place book that keeps your sigils together as your collection grows.

It’s optional: you don’t need it to start or finish any game.

The printed Reliquary with a sigil
Merlin wizard divider

💷 WHAT’S FREE, WHAT’S PAID

The Codex, the Reliquary and The Alchemist’s Study
  • Free: the Reliquary — the file on this page.

  • Paid: the games themselves. The first, The Alchemist’s Study, is crowdfunding on Kickstarter now from £20. Sigils are earned by completing games and aren’t in this download.

👉 The first game, on Kickstarter

👉 About the series

👉 Try The Apprentice’s Test — a free 25-minute browser mystery, no printer needed.

Merlin wizard divider

📦 IN THIS DOWNLOAD

  • The upright print-in-place Reliquary book, R12, as a geometry-only STL for single-colour printing

🖨 PRINTING — THE SHORT VERSION

  • Print upright as supplied, 100% scale, millimetres. Envelope about 137.5 × 41.3 × 190 mm.

  • Re-slice for your own printer; there’s no profile or G-code. Check hinge gaps in your slicer.

  • Let it cool fully, then gently free the cover; don’t force a fused joint. No metal pin needed.

  • Optional closure: four 6 × 3 mm disc magnets (check polarity). Keep magnets and small parts away from children and pets.

Merlin wizard divider

Licence: personal, non-commercial printing only. No resale of prints or files.

Photos show my actual print. The cover and the three-book image are edited photographs.

Tagi