A4T WWBMG Motor Plate for EBB36 Gen2 — Modular Umbilical Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A4T WWBMG motorplate was designed around the new EBB36 Gen2, with one main goal: to experiment with different umbilical
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
his A4T WWBMG motor plate was designed around the new EBB36 Gen2, with one simple goal: trying different umbilical mounting solutions without reprinting the whole plate every time.
The secret behind this highly sophisticated “modular system”? Four holes that accept standard 5 × 4 × 3 mm heat-set inserts. That’s it. No revolutionary engineering claims here—just somewhere to bolt interchangeable supports and see what works best.
The idea is to keep the same motor plate while experimenting with different umbilical attachments, printing only the small support whenever you want to try something new.
This is an experiment, not a definitive solution. The four holes simply leave some room to play.
Thanks to the creators of the models that inspired this project. I rebuilt the plate from scratch around the Gen2 to start with clean geometry and avoid carrying over the small compromises that can accumulate through successive modifications.
