1 / 5
Freshwater Fish Wall Art Set – Pike, Perch & Carp with Hidden Keyhole Mounts — zdjęcie 1
1 / 5

Freshwater Fish Wall Art Set – Pike, Perch & Carp with Hidden Keyhole Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three detailed 25 cm fish silhouettes pike, perch and carp with hidden keyhole mounts. Flat prints, no supports.

Ocena
0 / 5
Polubienia
6
Pobrania
22
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A set of three detailed freshwater fish for your wall: a northern pike with an open jaw full of teeth, a striped perch with its spiky dorsal fin, and a carp rolling out of a splash.

What you get

- 3 STL files, each 250 mm wide

- Hidden keyhole mounts on the back, nothing visible from the front

- The mounts keep the fish a few millimetres off the wall for a nice shadow line

- Flat, one piece each, no supports; the bed side becomes the clean front

- All three test-printed on a Prusa MK4S in Prusament PETG

Print them in three colours for a set, or all in one colour.

Printer: Prusa MK4S, 0.4 mm nozzle

Material: PETG (PLA works too)

Layer height: 0.2 mm, 2 perimeters, 15% infill

Supports: none Brim: none Ironing: off

Print exactly as oriented: the side on the bed is the front, the keyhole mounts grow up from the back.

On a 250 x 210 mm bed, rotate around Z:

- Pike: 35°

- Perch: -25°

- Carp: -20°

Sizes

- Pike: 250 x 100 x 7.8 mm

- Perch: 250 x 168 x 7.8 mm

- Carp: 250 x 180 x 7.8 mm

PETG tip: dry the filament and slow down the first layer if the fine fins droop or string.

Mounting: 2 screws or nails per fish, level. Head max 6.5 mm, shank max 3 mm.

Screw spacing: pike 45 mm, perch 112 mm, carp 118 mm.

Leave the head about 1.5 mm out of the wall, hook the fish over it and slide it down.

Need a quick one? The simple 100 mm pike prints in under 20 minutes:

https://www.printables.com/model/1875590-simple-pike-silhouette-quick-print-100-mm

Made one? Post a make, I'd love to see your colours.

Designed by B2DesignandPrint.

Tagi