Hot glue gun holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did this thing to be cut in my CNC, in 3mm MDF. I believe it can also be printed in 3D and then glued with .. hot…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I did this thing to be cut in my CNC, in 3mm MDF.
I believe it can also be printed in 3D and then glued with .. hot glue! That's why I've also attached the STLs. But notice I did not try to print in 3D.
I think Laser Cutting is perfect too :)
The pieces were glued together with wood glue, no need to nail or screw.
The design was inspired by a video from Jenni.Swiss but as he did not make the drawing available I did it from scratch with some adaptations.
As there are dozens of hot glue gun models I have attached STEP to anyone who wants to change.
Category: DIY