Teltonika RUTX50 10-inch rack 1U bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solutions to mount RUTX50 in 10-inch rack with a height of 1U
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I found no solutions to mount RUTX50 in 10-inch rack with a height of 1U, so I rolled my own. Router has exactly the right height, so it was just a matter of adding the sides. My design id made around original RUTX50 CAD model, so curvature fitment is perfect. Print is silver sprayed to match the version I have got. To fix the brackets to the router's side slots you would need a few M3 8mm long screws. I have publish different variations of the left brackets with a power switch and opening for the power cable or without it.
Power switch used: https://amzn.eu/d/0cjpmwfO