AIM OP-V4 Picatinny Sight (No-Hardware)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An AIM OP-V4 inspire sight made for picatinny compatible nerf guns.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
About the Files
In the Downloads section, you'll find the Picatinny Sight and an optional Hardware Pin file. The sight is designed to securely attach to a Picatinny rail without requiring the pin. However, if you'd like additional retention and stability, you can print and install the Hardware Pin for extra support.
Print Settings:
Hardware Pin
100% infill (To give it extra strength)
Print the pin on its side (Printing it pointing up like a flagpole will make it weaker)
Supports ON (Printing this correctly on its side will require supports)
Picatinny Sight
Supports ON
Infill? Completely your choice depending on intended strength.
DISCLAIMER
This Picatinny Receiver Blank was made for use on picatinny compatible nerf guns and is not for use on real firearms.