1 / 3
Printrbot Printrboard mounting bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing was made with Tinkercad.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/dY7R20XRKJ6
This is a bracket to mount a Printrboard (Printrbot electronics board) to one of the Printrbot's Z motors.
Print instructions
Category: 3D Printer Accessories Instructions
The tabs, and the slots they fit in on the main bracket, may need some cleaning before they'll fit right.
I used 10mm M3 screws to attach the tabs to the motor - your motor may vary.
I used 3/8 inch #4-40 screws to mount the Printrboard to the bracket. 10mm M3 screws might work as well.
- Test fit and clean up tabs and slots if needed
- Attach Printrboard to bracket
- Slide tabs into slots
- Attach tabs to motor