auto upholstery clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend wanted some clips for his car so I agreed to try making them. He said they worked. I printed the 1st one with…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A friend wanted some clips for his car so I agreed to try making them. He said they worked.
I printed the 1st one with supports but because the clip is so thin it was difficult to remove the supports from the print so I printed again without supports. A little drooping in a couple of places but didn't stop them from working.
Print Settings
Printer:
DaVinci 1.0 / Repetier
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
100
Notes:
Best to orientate them so they stand on one edge. I used 0.1mm layer height to make sure I got the finer details. I also used ABS because it's stronger and flexes better than PLA.
Category: Automotive