1 / 2
Four-Colour Race Car Kit (push-fit, no glue) — zdjęcie 1
1 / 2

Four-Colour Race Car Kit (push-fit, no glue)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toy race car printed in 4 colours: inlaid stripes, number, windshield and headlamps press in. Wheels spin on 4 mm rods.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

A push-together toy race car, 100 × 46 × 36 mm, printed in four colours with no paint and no glue for the details. The rounded blue body has pockets for coloured inlay pieces: a slanted speed stripe on each side and the number 27 on the roof (both white), a tinted black windshield panel, and two domed orange headlamps. The four black wheels spin on two axle rods through the body.

  • Blue: body (race_car_kit_body.stl)

  • Black: 4 wheels + windshield (race_car_kit_black.stl)

  • White: 2 side stripes + roof number (race_car_kit_white.stl)

  • Orange: 2 headlamps (race_car_kit_orange.stl)

  • You also need two 4 mm rods, about 44 mm long (steel rod or a wooden dowel) for the axles.

Printing

Print each STL in its colour. Every part prints flat with no supports; 0.2 mm layers and 15–20 % infill work well. Press the inlays into their pockets (0.15 mm clearance per side), push the rods through the body (0.2 mm clearance, so they turn freely) and press a wheel onto each end (0.1 mm, so the wheels grip the rod).

Customize it in your browser

This model is fully parametric. Change the roof number (race_number), the size and the fit clearances, or set print_part to export one colour plate at a time. Open it in the free OpenSCAD Playground, change the numbers and export your own STL: Open it in OpenSCAD Playground

Source

The OpenSCAD source and the rest of my models are on GitHub: github.com/SinaChavoshi/3d_printer_agentic_models

Designed with AI assistance in OpenSCAD.

Tagi