Door Jamb Hanger for a 1/2" PVC Rod (snap-fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stepped, flared snap-fit C-clamps that grip a door jamb and hold a 1/2" PVC pipe rod across the doorway. No screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A left and right pair of stepped, flared snap-fit C-clamps that attach to a door jamb without screws. Each has a saddle that holds a horizontal rod such as a 1/2" PVC pipe, for temporary hanging or mounting across a doorway.
Set for a 128 mm door jamb and a 22 mm (1/2" PVC) rod
Left and right hangers on one plate, 302 × 168 × 40 mm
Customize it in your browser
This model is fully parametric. Measure your door and change jamb_width, the trim and stop sizes, and rod_od. Open it in the free OpenSCAD Playground, change the numbers and export your own STL: Open it in OpenSCAD Playground
Source
The OpenSCAD source and the rest of my models are on GitHub: github.com/SinaChavoshi/3d_printer_agentic_models
Designed with AI assistance in OpenSCAD.
