Newell DC-K5 Charger Holder for IKEA SKÅDIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis pegboard mount for the Newell DC-K5 charger. You can also insert the charger with a battery attached and route th
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Standard Digital File License
Newell DC-K5 Charger Holder for IKEA SKÅDIS

A compact holder for storing your Newell DC-K5 charger on an IKEA SKÅDIS pegboard. The one-piece design features two integrated hooks, an open front and a bottom cable cutout. No screws, glue or assembly required.
Dimensions
Internal width: 48 mm
Internal depth: 19.5 mm
Holder height: 40 mm
Suggested PLA print settings
Material: PLA
Layer height: 0.20 mm
Walls: 4
Infill: 30%
Orientation: bottom flat on the build plate, opening facing up
Supports: only under the rear hooks
Temperature: use your filament’s recommended PLA profile
Print at 100% scale to preserve the SKÅDIS hook spacing. A small fit-test model is included—print it first to check your charger and pegboard.
After printing, remove the supports, insert the hooks into the pegboard and gently slide the holder down. Insert the charger from above. Hold the charger in place when removing a battery.