Universal Spool Clip – Holds Filament Ends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for 2–5 mm spool rims that holds the loose 1.75 mm filament end in a snap seat. Tiny, fast, no supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Standard Digital File License
Stops loose filament ends from unwinding and tangling – clip it on the spool rim and snap the filament in.
- Spring clamp with grip noses for spool rims of 2, 3, 4 or 5 mm (plastic or cardboard spools).
- Snap seat for 1.75 mm filament: a tapered slot guides the filament to a 1.4 mm neck, behind it the filament clicks into a round seat and stays.
- Works anywhere on the rim – no holes needed.
- Printed on its side, so the clamp and the slot flex along the layers.
- Tiny and fast: print a pair of every size in about 20 minutes.
Measure your spool rim with a caliper and use the matching clip (or one size smaller for a tighter grip).
**Print settings:** PLA oder PETG, 0,2 mm layers, 3 perimeters, 100 % infill, supports: nein.