Capsule Vending Machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by a "lottery machine" I created this capsule vending machine which can be used in many occasions.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I was asked if I could print a capsule vending machine a while ago. After searching many 3D printing model sites, I decided to make my own one to have something totally different to what is available at this time. After some time I came up with this idea. The "big ball" holding the capsules can be rotated which mixes the capsules and therefore adds some more randomness to the chosen/fetching capsule.
I separated several parts to minimize the need of supports. The pillars are tightened to the bottom plate with 2 M4 screws at each side. The stiffing ring is used for the big ball to keep it in shape. With this stiffing ring I only needed a little bit support at the threat for the crank lever and some for the top of the ball half.
The spacer rings are located between the pillars and the big ball. I did not glue anything else than the big ball and the bolts for the rotary knob and rotary tube. I used super glue gel.
You glue the rotary knob with the bolts to the rotary tube. Then this piece can be placed into the hole of the housing. With the big screw it can be tightened at the back side and therefore it cannot get out of place. The "shields" are only stuck into the housing. You will not have to glue them. All other parts should be self explaining.
Have fun with printing and playing with it. :-)