1 / 3
Sovol SV04 nozzle wipe block to brush adaptor — zdjęcie 1
1 / 3

Sovol SV04 nozzle wipe block to brush adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A printable block to replace the original wipe block with Elegoo Centauri Carbon Nozzle Brushes.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

An adaptor to replace the nozzle wipe blocks on the Sovol SV04 with Elegoo Centauri Carbon Nozzle Brushes. The brushes are found in multipacks on aliexpress for cheap.

Printed in PETG with top surface ironing to get the best adhesion from the brushes. Supports not needed.

Unscrew the original wipe block from the bucket and replace with the adaptor with the higher part at the front of the bucket. See pictures.

You might find the fit is very tight, make sure the adaptor is pushed as low as possible in the holder on the bucket and aligned before trying to screw it in.

Tagi