Ahrend De Cirkel tubular chair floor glider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-in floor glider for Ahrend De Cirkel tubular chairs. Parametric Fusion 360 script included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Public Domain
Replacement glider for Ahrend De Cirkel tubular chairs
Replacement plastic gliders for these vintage Dutch chairs. It snaps into the hole in the tube.
Fits: Ahrend De Cirkel tubular chairs with a 22 mm tube and an 11.7 mm hole in the underside.
Printing
- Material: PETG.
- Orientation: floor face down on the bed. No supports needed.
- Layer height: 0.15 mm.
- Fit check: print one first and test it before printing a full set.
Different chair? Make your own size
Run the included Fusion 360 script for this parametric model: unzip it into your Fusion Scripts folder, then go to Utilities → Scripts and Add-Ins. Then change the values under Modify → Change Parameters:
- hole_d: diameter of the hole in the tube
- tube_d: outside diameter of the tube
- wall_t: tube wall thickness (sets where the barb catches)
- interference: grip strength. Raise it if the glider falls out, lower it if it won't go in.
- disc_d (diameter), disc_t (thickness), saddle_depth, stem_len: match these with your old glider