1 / 7
Alcohol Marker Holder, 81 Slot Sci-Fi Organizer — zdjęcie 1
1 / 7

Alcohol Marker Holder, 81 Slot Sci-Fi Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

81-slot alcohol marker holder in a retro sci-fi armored shell with hover feet. Fits a Bambu A1 mini plate.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

An armored sci-fi hover-dock that keeps 81 dual-tip alcohol markers upright, cap end up, in a 9 by 9 grid you can read at a glance.

PRINT NOTES

Size: 170 x 170 x 40 mm. It fills most of the A1 mini plate (about 5 mm free on each side), so clear the plate edges first.

Compartments: 81 square pockets, 14.4 mm wide, 37 mm deep, 1.0 mm dividers, 3 mm floor. Made for round or slightly hex markers up to about 14 mm across; a 13.5 mm barrel slides in freely.

Markers stand vertically and stick out above the rim, so the caps stay easy to grab.

Printer/profile: Bambu Lab A1 mini, 0.4 mm nozzle, 0.16 mm layers, PLA, 10% infill.

Supports: yes, tree (auto), mostly under the four round feet and a few relief details.

Print time: 9 h 55 m. Filament: 236 g.

Printed single color; AMS not required. The pastel paint job in the pictures is a hand-painting idea, not a multi-color print.

ABOUT THIS MODEL

Designed with AI assistance (Tripo AI) for the armored shell, with the 81-pocket grid built to exact dimensions and fitted inside it, then repaired, scaled, sliced and prepared for printing by me.

The pictures are concept renders of the design in a painted retro colour scheme (the marker photo is a render too). The model has been sliced but not test-printed yet. Please measure your markers before printing: if yours are wider than 14 mm, scale the model up a little in the slicer.

Tagi