1 / 1
ASRock BC-250 ATX Adapter – Reinforced Remix (M3 Heat-Set Inserts) — zdjęcie 1

ASRock BC-250 ATX Adapter – Reinforced Remix (M3 Heat-Set Inserts)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reinforced ASRock BC-250 ATX mount remix adding extra stiffness, gussets, and M3 heat-set insert support for warm cases.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an updated revision of the ATX mounting bracket for the ASRock BC-250 board.

The original model provides a solid foundation, and this remix simply adds a bit of extra stiffness and threaded hardware support for setups running in warmer cases or heavier configurations.

What Was Updated?

Added M3 Heat-Set Insert Pockets:

Sized 4 mounting holes to take standard M3 threaded brass inserts (OD: 4.6 mm, Length: 5.7 mm) for smoother, repeatable assembly without wearing out plastic threads.

2 holes dedicated to securing the ASRock BC-250 board.

2 holes for fastening the I/O cover.

Slightly Beefed-Up Walls:

Added +2 mm to the bottom mounting flange for extra support where it bolts down.

Added +1 mm along the upper wall to give the vertical face a touch more rigidity.

Integrated Corner Gussets:

Added small triangular ribs with smooth fillets along the long wall to help maintain an exact 90° angle over long periods inside warm enclosures.

Tagi