1 / 1
Knock off GORE vent rain covers for Mesh Radios. For M6x1.0-7 and M12x1.5-10 Size Vents — zdjęcie 1

Knock off GORE vent rain covers for Mesh Radios. For M6x1.0-7 and M12x1.5-10 Size Vents

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These little Greeblies make a nice rain shield around the vents.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

These off brand GORE vents are fantastic for keeping moisture out of small sealed electrical boxes and maintaining equal pressure. But if you live somewhere with a lot of rain the driving rain can saturate the membrane and result in moisture ingress. 

These little Greeblies make a nice rain shield around the vents. I have tested these extensively and they provide just enough little protection to ensure reliable operation of your waterproof vents in the heaviest of rains. Make sure to orient your vents DOWN. If your vent is facing up at the sky you've done it wrong. Side mounted also work if you cut out a little drain hole on the bottom edge of the vent cover.  

For M6x1.0-7 and M12x1.5-10 Size Vents. But if you have different sizes you could scale these models to fit. Install with CA Glue around the base where it attaches to your enclosure. 

Print with the side with the circular holes flat on your print bed. No supports needed. 

Tagi