1 / 7
Stone Cairn Jewelry Box – Stacking Faceted Stones for Rings, Stud Earrings and Chains — zdjęcie 1
1 / 7

Stone Cairn Jewelry Box – Stacking Faceted Stones for Rings, Stud Earrings and Chains

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four faceted stones stack into a cairn; each is the lid of the one below, holding rings, stud earrings and chains.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial

Four faceted, hand-hewn-looking stones that stack into a small cairn - and open into three closed, separate chambers. Each stone is the lid of the chamber in the stone below: rings stand in V-slits, stud earrings sit in slit fins, chains lie in lanes in the base. The cap is solid. On the dresser or nightstand it looks like a small stone sculpture, not a box.

Validation status (please read): a digital design, checked in CAD (fits, port clearances, wrong-order seating) and in the slicer (no supports, no floating islands). It has not been physically printed or tested. Print the coupons first. All pictures are renders of the CAD model or drawings; the jewellery, nightstand, lamp and book are simple stand-ins - none is a photograph.

Features

  • Three closed, separate chambers plus a cap. The order follows use: cap, then rings, then studs, then chains in the base.

  • A hidden lip-and-groove port centres every stone and lets it turn freely - turn the stones to compose the cairn.

  • Fixed order by design: the ports step down 60 / 55 / 50 mm, so each stone seats in one place only (a stone set on the wrong lip does not seat - checked in CAD for every wrong pair).

  • Gutter-free chambers: vertical walls the size of the opening, and fitted drop-in inserts (ring V-slits, stud fins, chain lanes) cover the floor, so nothing hides under a lip. Print the inserts in a contrast colour.

  • Planar facets made for FDM: every surface prints without supports or brim. One colour per stone gives an ombre - just a filament swap.

  • Print-first coupons for the fit-critical port and the stud and ring slits.

What it holds

  • Rings (S3): four V-slits, 6.5 mm open at the top and 1.6 mm at the bottom - push the band in and it wedges at its own width, standing along the slit. About 6 rings at US 7 or 4 at US 13 (slim bands, about 2 mm). Ring heads up to about 7 mm above the band at US 7; at US 13 only 0.6 mm of head room, so plain slim bands only at that size.

  • Wider bands wedge higher in the slit: the largest size that fits without a head is about US 11 for a 4 mm band, US 9 for 5 mm and US 7 for 6 mm. Larger wide bands do not fit standing, and bands wider than about 6.4 mm do not enter the slits.

  • Stud earrings (S2): 6 pairs. Drop the post into a slit so the face rests on the fins; keep the back in a channel between the fin rows or leave it on the post. Stud posts only - hoops, drops and huggies do not fit.

  • Chains (S1): 3 chains, one coiled chain per 19 mm lane.

Dimensions

Stack 141 mm tall. S1 138 x 105 x 40 mm, S2 116 x 92 x 36 mm, S3 98 x 81 x 38 mm, S4 87 x 73 x 33 mm. Chamber openings (S1 / S2 / S3) 60 / 55 / 50 mm, clear depth 36 / 30 / 32 mm; ports 0.3 mm clearance per side. Every stone fits a 210 x 210 mm bed.

Which files?

  • Ready-to-print PrusaSlicer projects, one per print job, parts oriented, Prusa MK4S HF0.4 PLA 0.2 mm settings embedded (other printers: switch the printer and material profile; on a 210 mm bed press Arrange for the coupon and insert jobs): 0_print_first_coupons, 1_S1_chain_stone_base, 2_S2_stud_stone, 3_S3_ring_stone, 4_S4_cap_stone, 5_inserts_chain_stud_ring.

  • STL files of the 4 stones, 3 inserts and 3 coupons.

  • model.py - the CadQuery source.

Print settings

  • Matte PLA (layer lines show less). Stones one colour each - for example charcoal, clay, sand, bone - or all one colour; inserts in one contrast colour.

  • 0.4 mm nozzle, 0.2 mm layers, no supports, no brim. Stones standing on their flat seat (groove side down, lip up) as exported; inserts plate down.

  • Print burden: the six projects on the embedded MK4S profile are about 265 g of PLA and about 7 h in total. On a conservative generic 0.4 mm profile the set (4 stones + 3 inserts) is about 282 g and 20 h, the base stone alone about 6 h 42 min. PrusaSlicer estimates, not measured; slower printers take longer.

Assembly

  1. Print the coupons first. Set the groove ring on the lip ring: it should drop on, sit flat and turn freely without rocking. Drop a stud post into the fin slit and push a ring band into the V-slit. If the port pair binds or rocks, calibrate your printer (XY compensation) before printing the stones.

  2. Print the four stones and the three inserts.

  3. Drop each insert into its chamber: chain lanes into S1 (the largest), stud fins into S2, ring slits into S3. Lift an insert out by a divider, its fins or its ridges.

  4. Stack in order S1 (base), S2, S3, S4 (cap). Each stone drops onto the lip of the one below and turns freely.

To open a chamber, lift everything above it - lift the stones upright (a stone on top is only located by its lip, not held), or take the cap off first.

Limitations

  • Digital design only: not physically printed or tested.

  • Small capacity (see What it holds) - for an everyday set, not a large collection.

  • Closed, not sealed: no airtight or anti-tarnish claim.

  • If the cairn is knocked over, the stones separate and the chambers open.

  • Printed plastic in stone colours; the facets show 0.2 mm layer lines (matte filament recommended).

Credits

Stacking closed layers is a known idea (for example stackable jewellery boxes, Printables 333555), and printed decorative cairns exist (Printables 639861, 463795, 1619964). This design adds the faceted cairn that opens, the step-down ports with free rotation and the fitted, gutter-free inserts.

Pictures

Renders of the CAD model and a drawing, not photographs: the open ring stone with the cap set down (cover), the closed cairn on a nightstand, the ombre cairn on a studio background, the stud and ring chambers open, the ombre next to a one-colour cairn, the inserts and coupons, and the dimensions.

Tagi