1 / 7
Replacement Doll Crowns & Tiaras, Set of 3 — zdjęcie 1
1 / 7

Replacement Doll Crowns & Tiaras, Set of 3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three clip-on crowns for fashion and princess dolls. All three print in under half an hour, no supports.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Three clip-on crowns for fashion and princess dolls. All three print in under half an hour, no supports.

Files

  • STL: doll_crowns_set_of_3.stl. All three crowns, plain mesh, any slicer.

  • 3MF: fashion_doll_crowns.3mf. Bambu Studio project with my tested settings (PrusaSlicer opens the geometry).

My daughter has lost more doll crowns than I can count. Where they go is one of life's great mysteries. So I designed some replacements, and I fully expect every one of the originals to turn up now that I can print as many as she needs.

These clip on properly. The band springs open over the doll's head and wraps round behind it, so the crown stays put while it is being played with, instead of sliding off at the first twirl.

What's on the plate

  • Heart Scroll: A big heart with curls either side

  • Petal Crown: Five tall petals, three with gems

  • Heart Gem: A raised heart on a heart, with drops either side

All three take 2.3 g of PETG and 26 minutes (Bambu A1 mini).

In the 3MF they are separate objects, so delete any you don't want, or copy one to print a handful of spares (recommended, for reasons above).

Fit

Fits fashion and princess dolls about 30 cm (12 in) tall, like the one in the photos. Thick or styled hair is fine: the band sits in it like a real tiara.

Made for small hands

  • No points anywhere. Every edge and tip is rounded.

  • Each crown is one solid piece, with the decoration joined along its base, so there are no thin bits to snap off.

  • Printed in PETG it bends instead of breaking when it is pulled on and off.

Print settings

  • Material: PETG (shown in translucent blue). Not PLA: the band flexes every time it goes on, and PLA snaps

  • Layers: 0.12 mm

  • Walls and infill: 2 walls, 100%

  • Brim: 3 mm, outer only

  • Supports: None

  • Orientation: Upright, as supplied

PETG strings a little. Dry it first, and snip off any whisker at the tips before handing it over.

Safety

Small parts and a choking hazard. Not suitable for children under 3 years, and the dolls they fit carry the same warning. Check each crown after printing for strings or sharp bits. Adult supervision recommended.

These are my own designs, not copies of any brand's accessories, and they are not affiliated with or endorsed by any doll maker.

The design and testing here are mine, Claude helped with the OpenSCAD.

If it is useful, a like and a make with a photo really help. I read every comment.

Also on MakerWorld: https://makerworld.com/en/models/3477889

Tagi