Zombie Hand Grave
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Press the gravestone down and a zombie hand bursts out of the grave. Push the hand back and the gravestone pops up again
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A small graveyard desk toy with a hidden seesaw lever inside the stone base. The lever is 2.5 to 1, so pressing the gravestone only 12 mm makes the zombie hand rise more than 30 mm out of the dirt.
Push the hand back down and the gravestone rises again. The lever turns on printed stubs and the lid closes the slots, so no pins and no glue are needed. Hard stops are built in, so you can’t push anything too far.
Size about 8 x 11 cm, 9 cm tall, about 120 g of filament. One colour per part, no AMS needed: base dark grey, lever any colour (hidden), lid brown, gravestone light grey, hand green.
Assembly: put the lid upside down on a cup, push the gravestone and hand into their slots, lay the lever on top, lower the base over everything so the lever stubs drop into the slots, hold it together and flip it over.
Note: designed and checked in CAD (fit, clearances and the full lever movement), but not test printed yet.