Easter Egg Holder - Group 3 (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easter egg holders. Includes OpenScad source, so you can make your own custom versions.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Easter egg holders.
Includes OpenScad source, so you can make your own custom versions.
If you want, before you print, measure your egg diameter where you want it to rest on the holder and make your model match. Make it match by either editing the .scad and making a new .stl file, or by scaling it in your slicer.
These models have been tuned to allow printing without rafts or automatically generated support, so that they print well on my low cost printer. If your printer is like mine, use EggHolder_group3_2.with.custom.support.stl instead of EggHolder_group3_2.stl. And use EggHolder_group3_4.with.custom.support.stl instead of EggHolder_group3_4.stl.
See other Easter Egg Holders:
Group 1: https://www.printables.com/model/188710-easter-egg-holder-group-1
Group 2: https://www.printables.com/model/188708-easter-egg-holder-group-2
Group 3: https://www.printables.com/model/188707-easter-egg-holder-group-3 (this group)
Group 4: https://www.printables.com/model/188706-easter-egg-holder-group-4
Group 5: https://www.printables.com/model/188704-easter-egg-holder-group-5
Group 6: https://www.printables.com/model/412210-easter-egg-holder-group-6
Print Settings
0.2mm layer height