Modular Starfighter Kit - Swappable Wings, Engines and Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An original faceted starfighter with two swappable wing sets, two engine pods and a display stand. Pin-fit, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 10
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
Build your own fighter for the space armada. An original faceted design that snaps together with 3 mm pins: choose between the delta wing set and the forward-swept wing set, plug in the twin engine pods, and pose it on the display stand.
Size assembled: about 150 x 140 x 126 mm on the stand (150 mm long, 140 mm span).
What you print: fuselage, wings_delta and/or wings_forward_swept, 2x engine pod, stand. Every part has a flat base and all pin holes open onto the bed - no supports.
Print settings: PLA, 0.15-0.2 mm layers, 15% infill, 3 perimeters for strong pins. Light grey hull, darker wings, an accent colour for the engine pods; paint the canopy.
Assembly: press the fuselage onto the two pins of the wing set, press the pods onto the wing pins, and set the wing set's centre socket onto the stand pin. Pins are 3.0 mm in 3.5 mm holes - add a drop of glue if your printer runs loose, or sand lightly if tight.
Parametric FreeCAD design; the editable .FCStd and STEP files are included. Not test-printed yet - photos of a real print coming soon.