1 / 5
Libernovo Omni SE Armrest Swivel Lock — zdjęcie 1
1 / 5

Libernovo Omni SE Armrest Swivel Lock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lock your Omni SE armrest in a either a straight, outward angled or inward angled position.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

This is a remix of Pliind's version of the Maxis Swivel Lock.

After printing Pliind's version, I realized that the Omni SE had a slightly different armrest swivel design. I've remixed the model to specifically fit the Omni SE and added angled position options. I cannot confirm that these will fit any other Omni models.

I've made 3 models a Straight, Right and Left, for the straight position just print 2 and use them on either side. The Right and Left models offset by 8 degrees, if you want the armrest locked to an outward angled position match the right and left side of the chair with the markings on the print and if you want an inward angled position swap the left and right side.

I'm currently not planning on any other angled positions but if you are interested in something else let me know.

Installation:

-Remove the Allen head screw on the back, underside of the armrest.

-Gently lift from the back to remove the armrest pad. (it hooks in the front and there are 4 plastic tabs in the middle that hold it in place. Be careful, I broke one tab after repeated removal, although this doesn't affect the pad from being secured in place.)

-Remove the 2 screws, and lift to remove the armrest slider.

-Remove the screw that holds the triangular piece. This is no longer needed but should be put back in place for storage

-Lift the plate that the armrest swivels on and push out the metal ring from the bottom side. (be careful of the springs they can come out)

-Insert the 3D printed replacement and reassemble.

Tagi