Easter Egg Holder - Group 1 (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easter egg holders/ Includes OpenScad source, so you can make your own variations.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 202
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Easter egg holders.
Includes OpenScad source, so you can make your own custom versions.
See "How_to_Meshmixer_Voronoi.txt" for making your own holey models.
If you want, before you print, measure your egg diameter where you want it to rest on the holder and make your model match. Make it match by either editing the .scad and making a new .stl file, or by scaling it in your slicer.
These models have been tuned to allow printing without rafts or support.
See other Easter Egg Holders:
Group 1: https://www.printables.com/model/188710-easter-egg-holder-group-1(this group)
Group 2: https://www.printables.com/model/188708-easter-egg-holder-group-2
Group 3: https://www.printables.com/model/188707-easter-egg-holder-group-3
Group 4: https://www.printables.com/model/188706-easter-egg-holder-group-4
Group 5: https://www.printables.com/model/188704-easter-egg-holder-group-5
Group 6: https://www.printables.com/model/412210-easter-egg-holder-group-6
Print Settings
0.2 layer height