1 / 22
Shards of Infinity board game cards stands
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stands for the cards of the board game shards of infinity
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this protective case stands for the board game shards of infinity cards. I designed the stands in the back of the cases to be removable so its easier to pack it. The stands need to be oriented on their side to be printed. I also made a custom support on the bc card that you need to brake after the print. This was made so you can add a card at the top of the card using a small slit.
No supports needed. These examples were made with PLA 0.4 nozzle on the mk3.