Catchfence for Slotcar Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple screw-on Catchfence for slotcars, in case you have your slottrack on a raised platform, like a table.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
a simple 'Catchfence' to screw onto the sides of any table or platform where you have your track for slotcars. A sort of 'finish' to your table matching the racing theme.
It is however, purely decorative.
I wouldn't trust it to catch a car at full speed, especially not if you print this in PLA. Other materials will probably fail as well as it's quite a thin fence.
It has however catched a car for me that gently deslotted and rode off the track, so there's that. It was printed in PLA.
The small piece can be glued onto the top, if you so desire. Don't touch it, or it'll break loose.
4mm holes for the screws - on for screwing vertically and one horizontally.
Watch the orientation! - the Catchfence needs to lay flat with it's fence on the plate!
Spray paint with silver or zincspray, looks just like a real fence!