Simple CoralBoard case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an easy print, support-free print, simple case for the new Google CoralBoard™
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Important notes: This is entirely designed by me, not ai.
This is a super easy print, doesn't require any supports. There is an optional Vesa mount bottom, 75x75mm on center mounting holes. The heat-set inserts are kind of optional as it has a pretty tight tolerance fit (for the lid that is) but you could also put screws directly into the plastic as well if you fancy. I used M2.5x8mm button head screws w/ washers but flange head screws would be ideal. There are cutout holes in the appropriate places for access to plugs and pinouts. I used the Insignia petg from best buy and it came out great. Prints all in one plate too.
https://www.amazon.com/dp/B0FD7DQS8Y?ref=ppx_yo2ov_dt_b_fed_asin_title
The link above is for the heat-set inserts I had purchased. This is NON affiliate link and I receive nothing for providing this. I used the largest ones in the kit which are M2.5x4mm tall. Of course you can adjust the holes to fit your hardware you may have already.
Disclaimer: I do not own a coralboard and my design was based entirely off the provided STEP files from Google Coral here on printables. If there is anything that doesn't quite work right, PLEASE let me know and I will adjust accordingly... Thank you for viewing.