LayersFactory
Zgłoś model
1 / 2
Freenove FNK0114S 4" CYD Case — zdjęcie 1
1 / 2

Freenove FNK0114S 4" CYD Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quiklearner

@Quiklearner_1941019

This case is designed around a Freenove FNK0114S 4" CYD, optional 1000mAh LiPo and 30mm round speaker.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane
This is a sturdy case for the 4" Freenove 'Cheap Yellow Display' model# FNK0114S.

Additional Parts:

  • the CYD itself 👉 HERE or HERE.

  • (optional) 30mm round speaker 👉 HERE.

  • (optional) 1000mAh LiPo, measuring 50x34x50👉 HERE.

  • 4x M3x16 screws

  • 4x M3 Heat-Set Threaded Inserts (Voron Style, M3x5x4)

Files:

  1. FNK0114S_front_sd_only.stl - Front half of the case that allows access to the SD Card only.

  2. FNK0114S_front_ports.stl - Front half of the case with side-ports that allow access to UART/SPI/I2C and GPIO.

  3. FNK0114S_back_no_speaker.stl - Back half of the case with no speaker grill or support.

  4. FNK0114S_back_speaker.stl - Back half of the case with speaker grill and support.

  5. FNK0114S_speaker_clip.stl - Speaker retaining c-clip.

0.3mm clearances were built into the model. The speaker is held into position using the printable "C-Clip". a spot of glue or two can be used to lock the clip if desired.

*Note: Voron-style threaded inserts are used specifically because they are shorter in legth.

If there is enough interest in this, I will release .STEP files.

Peace.

Tagi

freenovecydcydcasesquachwatch