1 / 7
Xteink X4 Pro Protective Case with Integrated USB-C Charging — zdjęcie 1
1 / 7

Xteink X4 Pro Protective Case with Integrated USB-C Charging

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A flexible TPU 95A protective case for the Xteink X4 Pro that permanently accommodates the original USB-C pogo-pin adapt

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Xteink X4 Pro Protective Case — No More Charging Stand!

A flexible TPU protective case that incorporates the original USB-C pogo-pin adapter supplied with the Xteink X4 Pro.

Once installed, the adapter remains attached to the e-reader, allowing you to charge it with an ordinary USB-C cable. No need to carry the original charging stand!

Features

  • Integrated holder for the original USB-C charging adapter.

  • TPU 95A protective case with three functional, integrated buttons.

  • Separate PLA bezel, printable in your choice of colour.

  • Included tool for removing the e-reader from its case.

  • Original STEP CAD files for customization.

  • Carefully tuned Snapmaker Orca (Snorca) 3MF project.

IMPORTANT — Before Printing

The main case requires TPU 95A and PLA tree supports printed in the same job. A printer capable of dual-material printing is required to reproduce the tested configuration.

Use a 0.4 mm nozzle and 0.16 mm layer height.

Print all components in the orientations provided in the 3MF.

The project includes critical seam painting, support blockers and selective fuzzy skin. I recommend inspecting the project in Snorca, even if you use another printer.

Please read the included README before printing or assembling the case.

Designed and tested on a Snapmaker U1. This is an independently designed accessory, not an official Xteink product.