1 / 3
Counter lip for 2x4 or 2x3 for garage! — zdjęcie 1
1 / 3

Counter lip for 2x4 or 2x3 for garage!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

those are counter top i made in my workshop they cover side of a 2x4 like seen in pictures

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

those are counter top i made in my workshop they cover side of a 2x4 like seen in pictures, there one of 28cm long , 24 cm , a corner but it was custom made for my counter so thats why its is not egale in length , and a smaller piece that will fit probably any printer ! i print these in polymaker petg and 20% infill since some impact or weigth could be put on those pieces and i printed them slow the get a better finish if you print them horizontally hole will fit perfectly finission screw with 0.75mm diameter 

Tagi