1 / 1
Stealthchanger 350 Top Hat Spool Holder Arm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a filament spool inside the 350 Top Hat frame.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Lets you put a spool inside the rear of the extrusion top hat on your Stealthchanger.
Use with this arm:
and a PTFE tube coupler of your choosing, I used an ECAS-to-ECAS coupler from the backpack project.
Arm uses 4x M5x10 screws, guide 2x M3x8, holder requires a pair of 608 bearings.